SoundSwitch x SC6000/M & SC5000(M) + X1850

SoundSwitch x SC6000/M & SC5000(M) + X1850

SoundSwitch supports StagelinQ connection to the Denon DJ SC5000(m) and SC6000(m) Media Players.

This video shows you how to set up the Denon DJ Players and Mixer with SoundSwitch.



Connection Steps

Step 1: Connect an ethernet cable from the Denon DJ X1850 Mixers PC port to the computer running SoundSwitch.

Step 2 : Connect the Players to the X1850 Mixer.

Player One: Connect an ethernet cable from Player One Link Port to Port 1 on the X1800

Player Two: Connect an ethernet cable from Player Two Link Port to Port 3 on the X1800

Step 3 : Open SoundSwitch and enter Performance Mode.

Step 4 : Open the SoundSwitch Preferences and select Engine Prime and the Prime 4 option as shown below:

Important note:  You will need to restart SoundSwitch for these settings to take effect

Screen_Shot_2021-08-23_at_2.51.47_PM.png

Step 5 : Once SoundSwitch has restarted, enter Performance Mode and check the Connection Status Icons are showing active as shown below:

Screen_Shot_2019-05-15_at_7.52.01_AM.png

Have more questions? Submit a request